Page 1 of 3

MFH Ferrari F1 2007 1/12

Posted: Mon Mar 13, 2023 5:31 pm
by ferrarissimus
My next project is the 2007 in the China GP. It's a curbside or proportion kit as most of the modern F1 kits from MFH.
7C9B5589-A33D-4A9D-BACE-54089C02AEF4.jpeg
Resin cast parts are smooth and need only few preparation.
0EC16B93-8C6D-4891-9A81-E892A6988AB7.jpeg
Only problem are the holes in the white metal end plates. You have to paint the single parts of the complex front wing and glue them at the end, but this stage is too late for puttying.
So I soldered the outer hole but saved the inner hole for a strong fit of the wing.
0BB88269-515E-4EFC-B6CF-B021B2FBADE4.jpeg
6E562C1B-D9FC-477E-9FAC-43F863486396.jpeg

Re: MFH Ferrari F1 2007 1/12

Posted: Mon Mar 13, 2023 6:05 pm
by 43rdMichael
Will follow with interest.

Beautiful car. This has become the 312T4 of the modern era… 🤣

Re: MFH Ferrari F1 2007 1/12

Posted: Tue Mar 14, 2023 10:32 am
by rpython
Hi,
Will also follow with interest. My current project is the 1/12 F2008 also from MFH. Same parts breakdown, fits well with a few file swipes. One question tough : what paint will you use? I used Gravity Colors rosso scuderia on the F2008.
Cheers

Re: MFH Ferrari F1 2007 1/12

Posted: Tue Mar 14, 2023 2:38 pm
by Belugawrx
Nice start, I'll be following as well.
2 Quick questions..how do you go about cleaning / treating the resin for paint, and the white metal parts, do you sand those smooth or ....?
Very intricate looking car.
Cheers

Re: MFH Ferrari F1 2007 1/12

Posted: Tue Mar 14, 2023 8:16 pm
by jorgeralvear
Great start and great idea to solder the outside holes. Will follow with interest and also would like to know your plans for that special F2007 color…

Re: MFH Ferrari F1 2007 1/12

Posted: Sat Mar 18, 2023 5:37 am
by ferrarissimus
At first to answer the questions:
I prepare the resin parts by soaking in isopropyl and sanding with 3200 grid.
White metal parts were sanded and cleaned by acetone.
, metal primer and dark primer.
The only supplier for the right color is Gravity Colors Rosso Scuderia F1. I like the dark perl red tone of the Ferraris from Monaco 2007 to mid season 2008.
Dark perl red "Rosso Scuderia F1"
Dark perl red "Rosso Scuderia F1"
Having prepared the parts I used the Gravity dark primer as it was recommended on the bottle. But the result was disappointing. The red tone was too dark.
Colors on photos are a little bit suspect, the photo will not show the tone as it was real.
Rosso scuderia F1 over dark primer
Rosso scuderia F1 over dark primer
SSC_0023.JPG
So I had to sand all parts, primed with light grey primer and ordered a new two bottle set with undercoat and base cote.
The result was really satisfying.
Rosso scuderia F1over light primer
Rosso scuderia F1over light primer
Next photo shows the parts decaled and clear coated. The M... decals are aftermarket products.
SSC_0056.JPG

Re: MFH Ferrari F1 2007 1/12

Posted: Sat Mar 18, 2023 5:47 am
by daveyman
That red looks beautiful. Very well done.

Re: MFH Ferrari F1 2007 1/12

Posted: Sat Mar 18, 2023 7:44 am
by Belugawrx
Very nice paint and decal work !
Thank you for the answers..Cheers

Re: MFH Ferrari F1 2007 1/12

Posted: Sat Mar 18, 2023 5:20 pm
by gp-models
Beautiful paint and decal work, nice and clean finish, like it. :)

Re: MFH Ferrari F1 2007 1/12

Posted: Fri Mar 24, 2023 6:24 am
by Dede
Paint and decal work look fantastic, looking forward to next update.