Page 2 of 6

Re: Ferrari F1 2000 1/12 MG-models

Posted: Tue Sep 20, 2022 6:21 am
by gp-models
Good start, looking forward to your progress.

Re: Ferrari F1 2000 1/12 MG-models

Posted: Wed Sep 21, 2022 5:25 am
by ferrarissimus
Upper and lower chassis and motor cover-side pods are glued and puttied. Steps between the single parts are sanded.
SSC_0034.JPG
SSC_0037.JPG
SSC_0028.JPG
SSC_0031.JPG
The gap between side pods and undertray is filled with styrene sheet.
SSC_0081.JPG
SSC_0040.JPG
Panel line between under tray and side pods must be a little bit lower leads straight to the cooler openings. New panel lines are scratched.
SSC_0032.JPG
SSC_0030.JPG

Re: Ferrari F1 2000 1/12 MG-models

Posted: Fri Sep 23, 2022 4:29 pm
by ferrarissimus
Body and groundplate are glued, sanded and painted with grey base cote and pink. Cockpit was painted black before and CF decaled.
1AE886DC-B8B6-4B8D-9CEA-E1386ECD6B12.jpeg
C3998359-398D-4F39-91BA-99B682F2B506.jpeg
F085CFF4-D7C0-4753-9D54-0809AF3CA010.jpeg

Re: Ferrari F1 2000 1/12 MG-models

Posted: Fri Sep 23, 2022 4:59 pm
by Seema
All the work was worth it. Looks very good.

Re: Ferrari F1 2000 1/12 MG-models

Posted: Sat Sep 24, 2022 6:01 am
by gp-models
Looks way better now, good job!

Re: Ferrari F1 2000 1/12 MG-models

Posted: Tue Sep 27, 2022 5:59 am
by ferrarissimus
My attempt, to place the gearbox motor unit with mounted exhausts, failed, because the motor cover couldn't be closed. So I removed the motor and exhausts and decided to turn alu exhaust ends.
Motor and exhausts
Motor and exhausts
SSC_0038.JPG
SSC_0035.JPG
Turning exhaust end
Turning exhaust end
Turned exhaust ends
Turned exhaust ends
Exhaust end are temporary placed into sleeves glued at the gearbox remove them until the past job is finished
Exhaust end are temporary placed into sleeves glued at the gearbox remove them until the past job is finished

Re: Ferrari F1 2000 1/12 MG-models

Posted: Tue Sep 27, 2022 6:06 am
by ferrarissimus
Sorry, the automatic spell correction changed the last sentence. Must be: ..."to remove them until the paint job is finished"

Re: Ferrari F1 2000 1/12 MG-models

Posted: Wed Sep 28, 2022 5:56 am
by Inuyasha
Very nice work! I like Schumi´s cars and everything around him, so keep up your great work!

Re: Ferrari F1 2000 1/12 MG-models

Posted: Wed Sep 28, 2022 2:07 pm
by gp-models
Inuyasha wrote: Wed Sep 28, 2022 5:56 am Very nice work! I like Schumi´s cars and everything around him, so keep up your great work!
+1 here, still like what your doing and i bet the result will be another stunner :)

Re: Ferrari F1 2000 1/12 MG-models

Posted: Thu Sep 29, 2022 6:04 am
by ferrarissimus
Some progress with the front wing. Removed the cast gurney flaps and made some new of 0.3 mm alu sheet.
SSC_0014.JPG
SSC_0009.JPG