Hose Fittings/Joints, Screws, Electr. Connectors/Plugs, Tire Valves

[steinietrabi]

Since I was just writing in the topic, I remembered that I also made some new things...

Bolts/Screws (1/12)
Type 1: Hex1mm / Ø0.7mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Bolt%20A_1.JPG
Type 2: Hex1mm / Ø0.7mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Bolt%20B_1.JPG
Type 3: Hex1mm / Ø0.7mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Bolt%20C_1.JPG
Type 4: Hex1mm / Ø0.7mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Bolt%20D_1.JPG
Type 5: Ø1mm / Ø0.7mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Bolt%20E_1.JPG

Electrical Connectors (1/12 and 1/20)
Type 1: max. Ø2.6mm / L=5mm
Type 2: max. Ø2mm / L=5mm
Type 3: max. Ø1.5mm / L=3.75mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Electrical%20Connector%201-12.JPG

Electrical Plug (1/12)
Type 1: 1.65x2mm / L=5.5mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Electrical%20Plug%201-12.JPG

Hose Joints (1/12 and 1/20)
Type 1: Hex1.5mm / L=4.3mm
Type 2: Hex1.2mm / L=3.4mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Hose%20Joint%20Japan%20Set%20A%200%C2%B0%201-12.JPG
Type 3: Hex1.5mm / H=3mm
Type 4: Hex1.2mm / H=2.5mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Hose%20Joint%20Japan%20Set%20A%2090%C2%B0%201-12.JPG
Type 5: Ø1.6mm / L=4mm
Type 6: Ø1.3mm / L=3.2mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Hose%20Joint%20Japan%20Set%20B%200%C2%B0%201-12.JPG
Type 7: Ø1.5mm / H=3mm
Type 8: Ø1.2mm / H=2.5mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Hose%20Joint%20Japan%20Set%20B%2090%C2%B0%201-12.JPG

Rivets/Nuts (1/12 or 1/20)
Type 1: Ø1mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Rivet%20big.JPG
Type 2: Ø0.8mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Rivet%20small.JPG

Tire Valve (1/12)
Type 1: Hex1.5mm / L=3mm
http://steinietrabi-skoda-fabia.de/Modellbau/Hose%20Fittings/Tire%20Valve%201-12.JPG

[woodgp]

hello may I buy some of these , or did I miss that in thread ..Joe

[Hugeprong]

+1!

[gp-models]

Nice stuff, i did the bolts too, only bigger, means a complete buildplate with a few hundred on top

[Malcolm]

Just to follow up on a couple of posts above. Is it possible to buy these, or do I need to PM?
Thank you
Malcolm

[Joaquin]

I purchased som time ago a set of hose fittings and allen screws. Very happy with that

[steinietrabi]

Just to follow up on a couple of posts above. Is it possible to buy these, or do I need to PM?
Thank you
Malcolm

Please send me a PM