Speed Build : Stewart Ford SF-3 - Complete!!
Re: Speed Build : Stewart Ford SF-3 - Complete!!
Not only very fast, but extremely nice build!
Dalin
Dalin
-
- Major Constructor
- Posts: 1185
- Joined: Sun Feb 10, 2008 10:15 pm
- Location: Sydney, Aus
- Status: Offline
Re: Speed Build : Stewart Ford SF-3 - Complete!!
WOOOSHH! - Nice once Chris - really smart build. Great use of carbon decals, heat shielding, steering wheel & turned parts. Any chance you can run through the additonal parts such as antennas & wheel nuts for me?
Makes me want to finish off the Williams ASAP now =)
Makes me want to finish off the Williams ASAP now =)
-
Topic author - FOTA Chairman
- Posts: 3178
- Joined: Sat May 14, 2005 8:50 am
- Your Name: Chris Bartholomew
- Favorite F1 Team or Driver: Forza Ferrari!!!
- Location: Michigan, USA
- Status: Offline
Re: Speed Build : Stewart Ford SF-3 - Complete!!
Hello All,
Thanks again for all the nice comments. To give a summary of the extras and mods I made for this build, here you go:
C.F. Decals:
- Floor & Brake Ducts: S27 (Medium) toned down with Tamiya Smoke
- Wings : SMS 1/24 Twill Weave sealed with M.M. Metallizer Sealer
- Seat Middle : Hobby Design Twill Weave toned down with Tamiya Smoke
- Seat Outer and Cocpit sides : SMS 1/24 Hi-Def sealed with M.M Metallizer Sealer
Cockpit:
- Seat-Belts : SMS 1/20 Modern F1 p.e. with my standard belt material
- Buttons/Switches : Sakatsu machined aluminum, painted randomly to add some color.
- Steering Wheel : Spare parts bin from a Tamiya McLaren MP4/13
Fasteners:
- Body Fasteners : Hobby Design 0.5mm Flat Rivets (C)
- Winglet Rivets : Hobby Design 0.5mm Tapered Rivets (B) - I thought they looked best for this area.
- Front Wing Plane : Scale Hardware 0.5mm Brass Rivets with a good soak in "Blacken-It" to darken them.
- Front Wing Endplates : SMS p.e. screw heads
- Rear Wing Endplates : SMS and Crazy Modeler p.e. screw heads
- Barge-Boards : Crazy Modeler hex nuts - I highly recommend the Crazy Modeler fastener set.
- Mirros : RB Motion internal hex nuts recessed into the mirrors
Wheels & Tires:
- Tire Valves : RB Motion 1/20 tire valves
- Wheel Nuts : Painted the original machined nuts (blue and red) - I couldn't modify those beautiful wheels
- Tires : Original kit tires, spun on a rotary tool to give a woron look and round them out (they're pretty square out of the box ) - I wanted to use a nice set of MFH printed tires, but was concerned about getting the marking off of them
Exhausts :
- Heat-shielding : M.M. Stainless Steel with Tamiya Flat Clear
- Heat staining : Tamiya weathering kit, Burnt Orange and Oil Stain
- Pipes : Aluminum tube
Antennas:
Pitot Tube : Original kit wire bent with round nose pliers
Antenna : Hobby Design machined aluminum
Others :
- Skid-Plank : KA Models wood sheet (A)
- Cameras : Poached from an extra Tamiya Ferrari F2001, painted M.M. Aluminum Plate Metallizer and SMS 1/24 Twill Weave
Paint:
- Tamiya Light Grey Primer : 2 coats (to check for blemishes)
- Tamiya White Primer : 3 coats
- Tamiya TS-26 White : 4 coats
- Tamiya TS-13 Clear : 4 coats - 2 mist, 2 heavy (I think I'm the only one here who likes TS-13 )
Well, that's about all I can think of at this moment. Any questions or more information, let me know, I'm happy to share.
Cheers,
Chris
Thanks again for all the nice comments. To give a summary of the extras and mods I made for this build, here you go:
C.F. Decals:
- Floor & Brake Ducts: S27 (Medium) toned down with Tamiya Smoke
- Wings : SMS 1/24 Twill Weave sealed with M.M. Metallizer Sealer
- Seat Middle : Hobby Design Twill Weave toned down with Tamiya Smoke
- Seat Outer and Cocpit sides : SMS 1/24 Hi-Def sealed with M.M Metallizer Sealer
Cockpit:
- Seat-Belts : SMS 1/20 Modern F1 p.e. with my standard belt material
- Buttons/Switches : Sakatsu machined aluminum, painted randomly to add some color.
- Steering Wheel : Spare parts bin from a Tamiya McLaren MP4/13
Fasteners:
- Body Fasteners : Hobby Design 0.5mm Flat Rivets (C)
- Winglet Rivets : Hobby Design 0.5mm Tapered Rivets (B) - I thought they looked best for this area.
- Front Wing Plane : Scale Hardware 0.5mm Brass Rivets with a good soak in "Blacken-It" to darken them.
- Front Wing Endplates : SMS p.e. screw heads
- Rear Wing Endplates : SMS and Crazy Modeler p.e. screw heads
- Barge-Boards : Crazy Modeler hex nuts - I highly recommend the Crazy Modeler fastener set.
- Mirros : RB Motion internal hex nuts recessed into the mirrors
Wheels & Tires:
- Tire Valves : RB Motion 1/20 tire valves
- Wheel Nuts : Painted the original machined nuts (blue and red) - I couldn't modify those beautiful wheels
- Tires : Original kit tires, spun on a rotary tool to give a woron look and round them out (they're pretty square out of the box ) - I wanted to use a nice set of MFH printed tires, but was concerned about getting the marking off of them
Exhausts :
- Heat-shielding : M.M. Stainless Steel with Tamiya Flat Clear
- Heat staining : Tamiya weathering kit, Burnt Orange and Oil Stain
- Pipes : Aluminum tube
Antennas:
Pitot Tube : Original kit wire bent with round nose pliers
Antenna : Hobby Design machined aluminum
Others :
- Skid-Plank : KA Models wood sheet (A)
- Cameras : Poached from an extra Tamiya Ferrari F2001, painted M.M. Aluminum Plate Metallizer and SMS 1/24 Twill Weave
Paint:
- Tamiya Light Grey Primer : 2 coats (to check for blemishes)
- Tamiya White Primer : 3 coats
- Tamiya TS-26 White : 4 coats
- Tamiya TS-13 Clear : 4 coats - 2 mist, 2 heavy (I think I'm the only one here who likes TS-13 )
Well, that's about all I can think of at this moment. Any questions or more information, let me know, I'm happy to share.
Cheers,
Chris
-
- Backmarker
- Posts: 308
- Joined: Wed Nov 14, 2007 10:24 pm
- Location: New England, USA
- Status: Offline
Re: Speed Build : Stewart Ford SF-3 - Complete!!
Awesome Job !!!
Also enjoyed the pic of your terrific work displayed in "the cabinet" !!
Congrats !
Also enjoyed the pic of your terrific work displayed in "the cabinet" !!
Congrats !
-
- FOTA Vice Chairman
- Posts: 1611
- Joined: Fri Apr 27, 2007 2:10 pm
- Favorite F1 Team or Driver: HHF
- Location: Germany
- Contact:
- Status: Offline
Re: Speed Build : Stewart Ford SF-3 - Complete!!
Very nice!
Marco
My Gallery: http://www.marcosaupe.de/modelle.html
My Gallery: http://www.marcosaupe.de/modelle.html
-
- FOTA Chairman
- Posts: 2887
- Joined: Sat Sep 20, 2003 12:38 am
- Favorite F1 Team or Driver: Alfa Romeo, McLaren, Williams
- Location: Melbourne, Australia
- Contact:
- Status: Offline
Re: Speed Build : Stewart Ford SF-3 - Complete!!
Simple yet looks fantastic, nice clean build.
-
- FOTA Chairman
- Posts: 2757
- Joined: Wed Jan 25, 2006 1:36 am
- Location: Melbourne, Australia
- Status: Offline
Re: Speed Build : Stewart Ford SF-3 - Complete!!
Super build, looks wonderful on the shelf!
-
- FOTA Chairman
- Posts: 4438
- Joined: Wed Dec 21, 2005 3:20 pm
- Favorite F1 Team or Driver: Stake Sauber
- Location: Oulu-Uleåborg Finland
- Status: Offline
Re: Speed Build : Stewart Ford SF-3 - Complete!!
Such a Great Build
My completed Models:
https://www.flickr.com/photos/150229040 ... 3349714787
https://www.flickr.com/photos/150229040 ... 3349714787