Tamiya Porsche 962C Shell/Dunlop and 956 “SWAP SHOP” WIP 12
-
- Formula e
- Posts: 26
- Joined: Sun May 02, 2010 1:30 pm
- Favorite F1 Team or Driver: None, just enjoy racing
- Status: Offline
Re: Tamiya Porsche 962C Shell/Dunlop WIP 4
Hello Regga,
Amazing job as always!
Are you planning to release a super detail set as you did with the 956 or is it too soon to tell? If so, I'm definitely in!!!
Regards!
Amazing job as always!
Are you planning to release a super detail set as you did with the 956 or is it too soon to tell? If so, I'm definitely in!!!
Regards!
-
Topic author - F1 Test Driver
- Posts: 274
- Joined: Fri Sep 07, 2012 1:40 am
- Location: Tokyo Japan
- Contact:
- Status: Offline
Re: Tamiya Porsche 962C Shell/Dunlop WIP 5
Hello, everyone!
Thank you for the comments.
I build Transmission this time.
956 original parts.
Rebuild parts.
Comparison.
Undertray.
Problem. A position of "Transmission-Undertray support" is too low.
Reference.
Modifying.
Making φ1.0 holes.
To join two pieces together and shaping.
Completed.
The installation of the rear wing. And modify the headlight shape.
To be continued.
Thank you.
Thank you for the comments.
I build Transmission this time.
956 original parts.
Rebuild parts.
Comparison.
Undertray.
Problem. A position of "Transmission-Undertray support" is too low.
Reference.
Modifying.
Making φ1.0 holes.
To join two pieces together and shaping.
Completed.
The installation of the rear wing. And modify the headlight shape.
To be continued.
Thank you.
1/24 Porsche 956 upgrade parts now on sale - https://claymodels.tokyo
-
- Major Constructor
- Posts: 1178
- Joined: Wed Apr 18, 2007 12:18 pm
- Your Name: PGarat
- Favorite F1 Team or Driver: Ferrari, McLaren, Lotus…
Chris Amon, P.Depailler, James Hunt, Jim Clark, Tazio Nuvolari, Ascari… - Location: SW of France
- Status: Offline
Re: Tamiya Porsche 962C Shell/Dunlop WIP 5
Hi,
Awesome build once again Regga!
I really love the way you make and add so much details.
Can't wait to see more.
Pascal
Awesome build once again Regga!
I really love the way you make and add so much details.
Can't wait to see more.
Pascal
I'd rather be flying!
If only Closed Minds came with Closed Mouth
If only Closed Minds came with Closed Mouth
-
Topic author - F1 Test Driver
- Posts: 274
- Joined: Fri Sep 07, 2012 1:40 am
- Location: Tokyo Japan
- Contact:
- Status: Offline
Re: Tamiya Porsche 962C Shell/Dunlop WIP 6
Hello, everyone!
This time, I build rear suspension. There is the parts which I made last time. However, I wanted a better thing and remade them.
Tie rod, Brakes cooling duct support, Shock absorber. Coil spring is a commercial product.
Because some parts were completed, I cast it.
I add some rods to an upper arm of the suspension.
Casting again.
Resin cast parts is completed.
Photo etching parts outside order now. If it arrives, all parts are completed.
Next work is 1988 962C 3.0L all water cooled engine.
The part of the cylinder block is cast.
The details of the crankcase are added from now on.
To be continued.
Thank you.
This time, I build rear suspension. There is the parts which I made last time. However, I wanted a better thing and remade them.
Tie rod, Brakes cooling duct support, Shock absorber. Coil spring is a commercial product.
Because some parts were completed, I cast it.
I add some rods to an upper arm of the suspension.
Casting again.
Resin cast parts is completed.
Photo etching parts outside order now. If it arrives, all parts are completed.
Next work is 1988 962C 3.0L all water cooled engine.
The part of the cylinder block is cast.
The details of the crankcase are added from now on.
To be continued.
Thank you.
1/24 Porsche 956 upgrade parts now on sale - https://claymodels.tokyo
-
- FOTA Chairman
- Posts: 4540
- Joined: Sun Jun 24, 2007 11:39 am
- Favorite F1 Team or Driver: Riccardo Patrese
- Location: Hull, England.
- Status: Offline
Re: Tamiya Porsche 962C Shell/Dunlop WIP 6
Absolutely stunning. So intricate, I don't know how you do it Regga. This is an amazing WIP. Thank you for sharing.
Re: Tamiya Porsche 962C Shell/Dunlop WIP 6
What an amazing Update Regga!
Unbelievable! It`s a pleasure to follow your work, inspiring
Unbelievable! It`s a pleasure to follow your work, inspiring
Take a stand!
-
- Formula e
- Posts: 29
- Joined: Sat Aug 25, 2012 7:04 am
- Status: Offline
Re: Tamiya Porsche 962C Shell/Dunlop WIP 6
As ever another fantastic installment in this build! - Inspirational as always Regga!
-
- FOTA Vice Chairman
- Posts: 1950
- Joined: Wed Dec 19, 2012 4:36 am
- Location: UK
- Status: Offline
Re: Tamiya Porsche 962C Shell/Dunlop WIP 6
Regga....as always, with each update, I'm sat here with a smile like a Cheshire cat!!
What more can I say?
Cheers, H
What more can I say?
Cheers, H
Re: Tamiya Porsche 962C Shell/Dunlop WIP 6
regga ............. you my friend are a true talent and a master of your craft. please keep them coming they are inspirational
-
Topic author - F1 Test Driver
- Posts: 274
- Joined: Fri Sep 07, 2012 1:40 am
- Location: Tokyo Japan
- Contact:
- Status: Offline
Re: Tamiya Porsche 962C Shell/Dunlop WIP 6
Hello, everyone!
Thank you everyone for your comments.
PE parts and coil spring arrived. With that, all of the parts is assembled.
I will make the instruction manual from now on.
As for more information concerning the product, I will get back in touch with you as soon as i can provide it.
Thank you.
Thank you everyone for your comments.
Harvey, I was inspired by you, so I want more detail of engine.harveyb258 wrote:Regga....as always, with each update, I'm sat here with a smile like a Cheshire cat!!
What more can I say?
Cheers, H
PE parts and coil spring arrived. With that, all of the parts is assembled.
I will make the instruction manual from now on.
As for more information concerning the product, I will get back in touch with you as soon as i can provide it.
Thank you.
1/24 Porsche 956 upgrade parts now on sale - https://claymodels.tokyo
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 215 Views
-
Last post by marlborored