Speed-Build : Jordan 199 (Modelers)
-
- Backmarker
- Posts: 308
- Joined: Wed Nov 14, 2007 10:24 pm
- Location: New England, USA
- Status: Offline
Re: Speed-Build : Jordan 199 (Modelers)
Nice Start !
-
- Best of the Rest
- Posts: 592
- Joined: Sun Nov 24, 2002 8:16 pm
- Your Name: Will C
- Favorite F1 Team or Driver: Mika Hakkinen, Jacque Villeneuve
- Location: CA
- Contact:
- Status: Offline
Re: Speed-Build : Jordan 199 (Modelers)
Good progress!!! the resin on this kit is rather soft... so be careful not to oversand..
One note is the screws under 2 sidepods are indeed important.. I filled up those screwed area because I felt the screw holes on undertray are too visible when being viewed from the side. The consequence was I had hard time to make the body to stay tight with the undertray
Cheers,
-- william
One note is the screws under 2 sidepods are indeed important.. I filled up those screwed area because I felt the screw holes on undertray are too visible when being viewed from the side. The consequence was I had hard time to make the body to stay tight with the undertray
Cheers,
-- william
Visit my personal page: http://www.wilchan.com
http://www.wilchan.com/j199/img_icon_1.jpghttp://www.wilchan.com/f2001/img_icon1.jpghttp://www.wilchan.com/m193/img_icon1.jpghttp://www.wilchan.com/r1/img_icon1.jpghttp://www.wilchan.com/f310b/img_icon1.jpghttp://wilchan.com/lotus_102/img_icon1a.jpg
http://www.wilchan.com/j199/img_icon_1.jpghttp://www.wilchan.com/f2001/img_icon1.jpghttp://www.wilchan.com/m193/img_icon1.jpghttp://www.wilchan.com/r1/img_icon1.jpghttp://www.wilchan.com/f310b/img_icon1.jpghttp://wilchan.com/lotus_102/img_icon1a.jpg
-
- FOTA Chairman
- Posts: 2757
- Joined: Wed Jan 25, 2006 1:36 am
- Location: Melbourne, Australia
- Status: Offline
Re: Speed-Build : Jordan 199 (Modelers)
Very nice WIP photos - the c/f turned out great!