CBartholomew4677 : Jordan Honda EJ11 (2008 Group Build)

Post by **CBartholomew4677** » Sun May 04, 2008 8:10 am

Just a few more because the floor took me so long to get right and seal. Hope you enjoy.
Chris

CaptainMark · Post by **CaptainMark** » Mon May 05, 2008 5:38 am

Looks like it's coming along quite quickly - sorry if it's been asked before, but is this your first resin kit?

Post by **CBartholomew4677** » Tue May 06, 2008 4:38 pm

Hello,
No, I built the S27 BAR 003 (Monaco GP Version, ironically the same season as the Jordan) before, which was my first. It's around here on the site somewhere in the Completed section. I have to say that this one has been a lot easier and faster than the BAR 003. The Jordan has more white metal and less p.e. I'm starting to become a bit fod of the mm kits as of late. Maybe the MFH Ferrari F2007 or S27 Stewart SF3.
Cheers,
Chris

43rdMichael · Post by **43rdMichael** » Wed May 07, 2008 2:39 am

Chris,

Your Jordan is progressing well ! Can't wait to see the decals go on

the SilverLine version of this car should land in my mailbox in the next couple of days, and I'm really excited to start building! Really cool car.

Post by **CBartholomew4677** » Sun May 25, 2008 8:47 am

Hello All,
I was getting a message that this previous thread was exceeding my upload limit. Does anyone know how I can delete old posts or increase my limit so I can attach pictures for this update? I appreciate the help.

Current status:D
ecals have been applied for the black sections and the shark mouth. I intend to seal over these with TS13 in order to have a consistent finish for the vehicle base color scheme. I added cf decal to the cockpit internal surface, and the ducting internal surfaces. You can see the cockpit stuff, but I think the air duct internals are tough to see when completed, but I'll do it anyhow. I added cf decl to the exhaust surround area, where the kit decas are simply black. From my reference, this is the right thing to do.

Wing endplates have the cf decals on the inside applied and are ready fr sealing.

Seat and steering wheel have made final completion and re waiting simply to be installed.

Exhausts have been completed. The kit actually didn't have exausts, so I made them out of aluminum tube, painted flat white and dusted up a bit drilled the body out a touch to fit.
Sealing of te body and bits will begin immediately, so hopefully I can have an update soon.
Hope you enjoy.
Cheers,
Chris

Post by **f1m** » Sun May 25, 2008 10:13 am

HI,

You can go to here - http://www.f1m.com/classic/PNphpBB2-pro ... -1611.html - to see your quota. You can also see what attachments you have and remove them.

You've hit the 15MByte limit...

I need to figure out what to do here cause we have more people hitting their limit.

You could post in your Gallery on the main site...

Eric

CBartholomew4677 wrote:Hello All,
I was getting a message that this previous thread was exceeding my upload limit. Does anyone know how I can delete old posts or increase my limit so I can attach pictures for this update? I appreciate the help.

Post by **CBartholomew4677** » Sat Jun 07, 2008 7:33 am

CBartholomew4677
Posted: May 25, 2008 - 08:47 AM

--------------------------------------------------------------------------------

Current status:
Decals have been applied for the black sections and the shark mouth. I intend to seal over these with TS13 in order to have a consistent finish for the vehicle base color scheme. I added cf decal to the cockpit internal surface, and the ducting internal surfaces. You can see the cockpit stuff, but I think the air duct internals are tough to see when completed, but I'll do it anyhow. I added cf decl to the exhaust surround area, where the kit decas are simply black. From my reference, this is the right thing to do.

Wing endplates have the cf decals on the inside applied and are ready fr sealing.

Seat and steering wheel have made final completion and re waiting simply to be installed.

Exhausts have been completed. The kit actually didn't have exausts, so I made them out of aluminum tube, painted flat white and dusted up a bit drilled the body out a touch to fit.
Sealing of te body and bits will begin immediately, so hopefully I can have an update soon.
Hope you enjoy.
Cheers,
Chris
----------------------------------------------------------------------------------------
Based on my previous post, I finally got my limit within bounds so I've got some updated pics for you all. Hope you all enjoy.
Cheers,
Chris

Post by **CBartholomew4677** » Sat Jun 07, 2008 7:40 am

OK, a few more pictures..... wings and exhaust.
Chris

Post by **CBartholomew4677** » Sat Jun 07, 2008 7:44 am

Just one more. Cockpit and exhausts.
Hope you enjoy.
Chris

ziggy · Post by **ziggy** » Sat Jun 07, 2008 1:27 pm

I always loved this car, nice and clean job!

can't wait to see it finished!