Thanks a lot!!
Audi R8 LMS GT3 BWT – Nunu 1/24
-
- World Champion
- Posts: 697
- Joined: Tue May 30, 2006 8:44 pm
- Favorite F1 Team or Driver: Ventisette Rosso
- Location: Toronto, Ontario
- Contact:
- Status: Offline
Re: Audi R8 LMS GT3 BWT – Nunu 1/24
Awesome build. Thanks for sharing.
-
Topic author - Backmarker
- Posts: 341
- Joined: Thu Oct 28, 2010 4:24 am
- Favorite F1 Team or Driver: Ferrari, Tyrrell
- Location: Madrid - Spain
- Contact:
- Status: Offline
Re: Audi R8 LMS GT3 BWT – Nunu 1/24
Ya estamos al final del proyecto!! En el post anterior, dejé la carrocería lijada a falta de pulimento, y es desde ahí donde comienzo. Usamos los pulimentos de Number5, primero el “Medium” y después el “Fine”, logrando este acabado:
We are already at the end of the project!! In the previous post, I left the body sanded pending of polishing, and that’s where I start now. I used Number5 polishes, first the “Medium” and then the “Fine”, achieving this finish:
Ahora, toca enmascarar y pintar las partes de negro con LP5 de Tamiya, semi gloss black, es decir, las salidas de aire de las ruedas delanteras, y la parte trasera:
Now, it’s time to mask and paint the black parts with Tamiya LP5, semi gloss black, I mean, the air outlets of the front wheels, and the rear part:
Y empezamos a poner `piezas en la carrocería: faros, rejilla delantera, salidas de aire delanteras tras las ruedas, pieza trasera….todo con pegamento Ultra Glue de Mig:
And we started to add parts on the body: headlights, front grille, front air vents behind the wheels, rear part….all glued with Mig Ultra Glue:
La siguiente foto os muestro como está todo colocado en el interior de la carrocería:
The following photo shows you how everything is placed inside the bodywork:
Para pegar las derivas del alerón trasero, utilicé el útil que fabriqué para alinear las ruedas cuando las pegaba. Usçe pegamento epoxy y cuando ya estaba un poco pegado, pero moldeable, puse el alerón en el útil y junté los extremos. Decir que es complicado poner el alerón con las fijaciones de fotograbado: me llevó tiempo y sudores!!
To glue the rear wing stems, I used the tool I made to align the wheels when I glued them. I used epoxy glue and when it was a bit glued, but moldable, I put the spoiler on the tool and joined the ends. Just to say that it is complicated to put the spoiler with the photo-etched fixings: it tooks time and sweat!!
Para terminar la carrocería en este post, un tema muy importante: las líneas de los paneles realizadas con negro del Panel Liner de Tamiya:
To finish the body in this post, a very important topic: the lines of the panels made with Tamiya Panel Liner black:
Y terminamos con el chasis: ponemos todas la piezas y lo pegamos:
And we finish with the chassis: we put all the pieces and glue them:
El siguiente post será el último!! Gracias por ver y comentar!!
The next post will be the last! Thanks for viewing and commenting!!
We are already at the end of the project!! In the previous post, I left the body sanded pending of polishing, and that’s where I start now. I used Number5 polishes, first the “Medium” and then the “Fine”, achieving this finish:
Ahora, toca enmascarar y pintar las partes de negro con LP5 de Tamiya, semi gloss black, es decir, las salidas de aire de las ruedas delanteras, y la parte trasera:
Now, it’s time to mask and paint the black parts with Tamiya LP5, semi gloss black, I mean, the air outlets of the front wheels, and the rear part:
Y empezamos a poner `piezas en la carrocería: faros, rejilla delantera, salidas de aire delanteras tras las ruedas, pieza trasera….todo con pegamento Ultra Glue de Mig:
And we started to add parts on the body: headlights, front grille, front air vents behind the wheels, rear part….all glued with Mig Ultra Glue:
La siguiente foto os muestro como está todo colocado en el interior de la carrocería:
The following photo shows you how everything is placed inside the bodywork:
Para pegar las derivas del alerón trasero, utilicé el útil que fabriqué para alinear las ruedas cuando las pegaba. Usçe pegamento epoxy y cuando ya estaba un poco pegado, pero moldeable, puse el alerón en el útil y junté los extremos. Decir que es complicado poner el alerón con las fijaciones de fotograbado: me llevó tiempo y sudores!!
To glue the rear wing stems, I used the tool I made to align the wheels when I glued them. I used epoxy glue and when it was a bit glued, but moldable, I put the spoiler on the tool and joined the ends. Just to say that it is complicated to put the spoiler with the photo-etched fixings: it tooks time and sweat!!
Para terminar la carrocería en este post, un tema muy importante: las líneas de los paneles realizadas con negro del Panel Liner de Tamiya:
To finish the body in this post, a very important topic: the lines of the panels made with Tamiya Panel Liner black:
Y terminamos con el chasis: ponemos todas la piezas y lo pegamos:
And we finish with the chassis: we put all the pieces and glue them:
El siguiente post será el último!! Gracias por ver y comentar!!
The next post will be the last! Thanks for viewing and commenting!!
-
- FOTA Chairman
- Posts: 2883
- Joined: Sat Sep 20, 2003 12:38 am
- Favorite F1 Team or Driver: Alfa Romeo, McLaren, Williams
- Location: Melbourne, Australia
- Contact:
- Status: Offline
Re: Audi R8 LMS GT3 BWT – Nunu 1/24
Stunning, simply stunning.
-
- F1 Test Driver
- Posts: 280
- Joined: Tue Aug 09, 2016 5:27 am
- Your Name: Martin Seelos
- Favorite F1 Team or Driver: Lotus, Williams, Toleman, Mclaren.
- Location: Innsbruck
- Status: Offline
Re: Audi R8 LMS GT3 BWT – Nunu 1/24
JesusM
I would like to see the pictures for your build report. What could be the reason.
I would like to see the pictures for your build report. What could be the reason.
Seema
-
Topic author - Backmarker
- Posts: 341
- Joined: Thu Oct 28, 2010 4:24 am
- Favorite F1 Team or Driver: Ferrari, Tyrrell
- Location: Madrid - Spain
- Contact:
- Status: Offline
Re: Audi R8 LMS GT3 BWT – Nunu 1/24
Hi Seema
it is strange because I can't see them either on my mobile or in my personal computer, but I can see them in the company computer.
It should be related to the permissions in Chrome. Anyway, you can check them in my blog: http://blog.maquetea.com/?p=9445
-
- FOTA Chairman
- Posts: 2609
- Joined: Thu May 12, 2005 9:43 pm
- Location: Melbourne, Australia
- Status: Offline
Re: Audi R8 LMS GT3 BWT – Nunu 1/24
Excellent work. Well done!!
-
Topic author - Backmarker
- Posts: 341
- Joined: Thu Oct 28, 2010 4:24 am
- Favorite F1 Team or Driver: Ferrari, Tyrrell
- Location: Madrid - Spain
- Contact:
- Status: Offline
Re: Audi R8 LMS GT3 BWT – Nunu 1/24
Thanks!!