Benetton B195 Academy
Posted: Mon Jan 18, 2021 2:17 am
Hi guys,
Last weeks I started with the Academy B195. Going to be curbside as most of my builds, just the outside as good as possible.
It is not really representing a particular race weekend. just a general (second half of the season, Airbox shape) B195.
I found out it is a decent kit, no real fitting issues, a lot of parts are nice, pretty refined. fitting of the parts is more or less Tamiya like..
But a lot of areas, like a lot of you might know, are highly inaccurate.. so I modified a lot of stuff on the body:
-Opened up the "wing shape parts" on the rear side.
-NACA scoop for oil cooler between wing support.
-Made the small airs coops on the engine cover.
-panels around rear suspension, drive shaft.
-Changed the lines on the top of the side pods (more straight instead of curved).
-Reshaped the nose a little bit.
-Changed the rear wing support.
-Made some changes to the wind screen.
-Hole for the fuel filler cap.
-Changed some panel lines.
-Build the head rest.
-small aero-ridge thing on top of airbox.
-other things I forgot to mention...
-And last but not least opened up the Y-spokes on the rims .
A lot of work but could turn into a decent B195.
Last weeks I started with the Academy B195. Going to be curbside as most of my builds, just the outside as good as possible.
It is not really representing a particular race weekend. just a general (second half of the season, Airbox shape) B195.
I found out it is a decent kit, no real fitting issues, a lot of parts are nice, pretty refined. fitting of the parts is more or less Tamiya like..
But a lot of areas, like a lot of you might know, are highly inaccurate.. so I modified a lot of stuff on the body:
-Opened up the "wing shape parts" on the rear side.
-NACA scoop for oil cooler between wing support.
-Made the small airs coops on the engine cover.
-panels around rear suspension, drive shaft.
-Changed the lines on the top of the side pods (more straight instead of curved).
-Reshaped the nose a little bit.
-Changed the rear wing support.
-Made some changes to the wind screen.
-Hole for the fuel filler cap.
-Changed some panel lines.
-Build the head rest.
-small aero-ridge thing on top of airbox.
-other things I forgot to mention...
-And last but not least opened up the Y-spokes on the rims .
A lot of work but could turn into a decent B195.