I Checked OUT of Rehab !- Ferrari 312B
Re: I Checked in to Rehab - Ferrari 312B
Very nice restauration of this car, good job!
Take a stand!
-
Topic author - F2 Champion
- Posts: 177
- Joined: Sun Feb 15, 2015 8:55 am
- Favorite F1 Team or Driver: Shadow
- Location: West Bloomfield, Michigan
- Status: Offline
Re: I Checked in to Rehab - Ferrari 312B
Small update - mainly for APJ01....
The number plate is from our Mountain Bike Relay - that is my team name, and since I have friends in high places...LOL.
https://i.postimg.cc/kXHbHnNJ/IMG-4494.jpg
More updates later today, as I have been working on the engine - not "power unit".
The number plate is from our Mountain Bike Relay - that is my team name, and since I have friends in high places...LOL.
https://i.postimg.cc/kXHbHnNJ/IMG-4494.jpg
More updates later today, as I have been working on the engine - not "power unit".
-
Topic author - F2 Champion
- Posts: 177
- Joined: Sun Feb 15, 2015 8:55 am
- Favorite F1 Team or Driver: Shadow
- Location: West Bloomfield, Michigan
- Status: Offline
Re: I Checked in to Rehab - Ferrari 312B
So many fragile brittle parts. It is a frustrating day. As there are some parts such as the fuel injection pump and other front of engine parts that aren’t even visible on this car with the engine installed-I am going to cheat. Those wires and fuel lines are crucial to actually positioning the engine FULLY in the chassis. The stack up in the front needs to clear the attachments. Now I see why I had such trouble getting all this stuff aligned 45 years ago.
-
Topic author - F2 Champion
- Posts: 177
- Joined: Sun Feb 15, 2015 8:55 am
- Favorite F1 Team or Driver: Shadow
- Location: West Bloomfield, Michigan
- Status: Offline
Re: I Checked in to Rehab - Ferrari 312B
Engine is ready for disassembly.
https://i.postimg.cc/3RJG69Rp/IMG-4287.jpg
Engine is disassembled and ready for a rebuild.
https://i.postimg.cc/cJWw7dGF/IMG-4432.jpg
First thing to do is chrome the intakes. This is not Alclad, but Rustoleum “metallic” paint over testors gloss black
https://i.postimg.cc/GhNjD0pf/IMG-4460.jpg
Cam covers and injection were stripped – I couldn’t get the black paint off the cam covers, so we will paint over what is there. It was really resilient paint!
https://i.postimg.cc/PJJmLKnh/IMG-4455.jpg
Since I couldn’t get the headers off, I hand painted the block and heads. Used Magnesium Buffing Metalizer for both. Looking much better and ready for re-assembly. I am comfortable with the “used worn” look. Then I added some panel line paint for some depth in places.
The exhaust were sanded down, white glue used in the joints and gaps and will get painted by brush with Tamiya X-2 white with some dulling X-21 mixed in in a 3:2 ratio.
https://i.postimg.cc/ZYsPkk6q/IMG-4467.jpg
I had to re wire the ignition completely. I drilled out the broken spark plugs, inserted wire into the original ignition cables and glued them on the backside of the cam covers. The wire gives nice structure to the ignition cables so now I can bend them how I want them.
https://i.postimg.cc/rFd1Mh9N/IMG-4469.jpg
Gear box was cleaned up and repainted with Tamiya acrylics. I am trying different materials as Testors Model Master is kaput. So I mixed the Tamiya Aluminum with a few drops of Copper to warm it up a bit. Detail was with Gold Leaf on the differential side plates. The ignition box I left alone, and may tone it down with dullcoat brushed on, as the replacement decals only came with one sticker and it needs two….
https://i.postimg.cc/1zhN9JYb/IMG-4500.jpg
Here is the finished engine about ready to get gearbox installed. I plan to put the chrome intakes on after the engine is in the car. I need to check the radius rods’ clearance to these, since this was the issue last time it was built.
https://i.postimg.cc/Bbfj3gZM/IMG_4520.jpg
https://i.postimg.cc/JzYt0m4y/IMG-4523.jpg
https://i.postimg.cc/65w81YmQ/IMG-4524.jpg
https://i.postimg.cc/x11c9qYD/IMG-4525.jpg
https://i.postimg.cc/3RJG69Rp/IMG-4287.jpg
Engine is disassembled and ready for a rebuild.
https://i.postimg.cc/cJWw7dGF/IMG-4432.jpg
First thing to do is chrome the intakes. This is not Alclad, but Rustoleum “metallic” paint over testors gloss black
https://i.postimg.cc/GhNjD0pf/IMG-4460.jpg
Cam covers and injection were stripped – I couldn’t get the black paint off the cam covers, so we will paint over what is there. It was really resilient paint!
https://i.postimg.cc/PJJmLKnh/IMG-4455.jpg
Since I couldn’t get the headers off, I hand painted the block and heads. Used Magnesium Buffing Metalizer for both. Looking much better and ready for re-assembly. I am comfortable with the “used worn” look. Then I added some panel line paint for some depth in places.
The exhaust were sanded down, white glue used in the joints and gaps and will get painted by brush with Tamiya X-2 white with some dulling X-21 mixed in in a 3:2 ratio.
https://i.postimg.cc/ZYsPkk6q/IMG-4467.jpg
I had to re wire the ignition completely. I drilled out the broken spark plugs, inserted wire into the original ignition cables and glued them on the backside of the cam covers. The wire gives nice structure to the ignition cables so now I can bend them how I want them.
https://i.postimg.cc/rFd1Mh9N/IMG-4469.jpg
Gear box was cleaned up and repainted with Tamiya acrylics. I am trying different materials as Testors Model Master is kaput. So I mixed the Tamiya Aluminum with a few drops of Copper to warm it up a bit. Detail was with Gold Leaf on the differential side plates. The ignition box I left alone, and may tone it down with dullcoat brushed on, as the replacement decals only came with one sticker and it needs two….
https://i.postimg.cc/1zhN9JYb/IMG-4500.jpg
Here is the finished engine about ready to get gearbox installed. I plan to put the chrome intakes on after the engine is in the car. I need to check the radius rods’ clearance to these, since this was the issue last time it was built.
https://i.postimg.cc/Bbfj3gZM/IMG_4520.jpg
https://i.postimg.cc/JzYt0m4y/IMG-4523.jpg
https://i.postimg.cc/65w81YmQ/IMG-4524.jpg
https://i.postimg.cc/x11c9qYD/IMG-4525.jpg
-
Topic author - F2 Champion
- Posts: 177
- Joined: Sun Feb 15, 2015 8:55 am
- Favorite F1 Team or Driver: Shadow
- Location: West Bloomfield, Michigan
- Status: Offline
Re: I Checked in to Rehab - Ferrari 312B
I have moved on to a little bodywork. Chinamalc, I have taken in your suggestion and removed the inner fairing on the front wings. I had already painted them so had to be careful on material removal. Not perfect but better I suppose.
https://i.postimg.cc/g0NCwnmv/IMG_4503.jpg
Then installation on the nose, should look good.
https://i.postimg.cc/FshLR7Tr/IMG_4528.jpg
https://i.postimg.cc/6qbttjHG/IMG_4530.jpg
Rear wing is complete, had to do a lot of fiddling and pinning of the parts on this one.
https://i.postimg.cc/tC5s0WKN/IMG_4526.jpg
https://i.postimg.cc/J7jyq9Kg/IMG_4527.jpg
And completed the rear oil cooler and fairing rebuild. That was a real mess, with broken parts and lots of pinning too. It all articulates like it should now, and will “straighten out” when attached to the car.
https://i.postimg.cc/k4GkWqgL/IMG_4506.jpg
https://i.postimg.cc/h4zGBq1C/IMG_4507.jpg
https://i.postimg.cc/s1dqFW4R/IMG_4456.jpg
I had a bit of a setback, as my spray booth got evicted from the basement. Wife has allergic reaction to a lot of things and this was the last straw. So I had to move it out to the garage (separate building) but it is quite cold. I can get it to 55 degrees F if I work at it. So my plan is to get my other models prepped (I work on a few at a time) and spend a few hours just painting out there, which is going to be better, as I don’t have the stress of worrying about her conditions. I can take my time. This car is pretty well done with painting anyway, it is the others that will benefit.
The next trick will be making some replacement parts with silicone mold and resin….stay tuned.
https://i.postimg.cc/g0NCwnmv/IMG_4503.jpg
Then installation on the nose, should look good.
https://i.postimg.cc/FshLR7Tr/IMG_4528.jpg
https://i.postimg.cc/6qbttjHG/IMG_4530.jpg
Rear wing is complete, had to do a lot of fiddling and pinning of the parts on this one.
https://i.postimg.cc/tC5s0WKN/IMG_4526.jpg
https://i.postimg.cc/J7jyq9Kg/IMG_4527.jpg
And completed the rear oil cooler and fairing rebuild. That was a real mess, with broken parts and lots of pinning too. It all articulates like it should now, and will “straighten out” when attached to the car.
https://i.postimg.cc/k4GkWqgL/IMG_4506.jpg
https://i.postimg.cc/h4zGBq1C/IMG_4507.jpg
https://i.postimg.cc/s1dqFW4R/IMG_4456.jpg
I had a bit of a setback, as my spray booth got evicted from the basement. Wife has allergic reaction to a lot of things and this was the last straw. So I had to move it out to the garage (separate building) but it is quite cold. I can get it to 55 degrees F if I work at it. So my plan is to get my other models prepped (I work on a few at a time) and spend a few hours just painting out there, which is going to be better, as I don’t have the stress of worrying about her conditions. I can take my time. This car is pretty well done with painting anyway, it is the others that will benefit.
The next trick will be making some replacement parts with silicone mold and resin….stay tuned.
-
Topic author - F2 Champion
- Posts: 177
- Joined: Sun Feb 15, 2015 8:55 am
- Favorite F1 Team or Driver: Shadow
- Location: West Bloomfield, Michigan
- Status: Offline
Re: I Checked in to Rehab - Ferrari 312B
I made my first mold from silicone, and a few parts. Very easy to do, and mirrors came out pretty nice. I lost these mirrors somewhere, so I stole a set from the McLaren garage when the mechanics went to the pub. Emerson is gonna be in for a big surprise at first practice.
Sorry for the small pictures guys.
https://i.postimg.cc/dtnTTwf8/IMG_4522.jpg
https://i.postimg.cc/9FvHbqsV/IMG_4548.jpg
https://i.postimg.cc/SsrmtNCd/IMG_4538.jpg
https://i.postimg.cc/dQ5q23qt/IMG-4549.jpg
Sorry for the small pictures guys.
https://i.postimg.cc/dtnTTwf8/IMG_4522.jpg
https://i.postimg.cc/9FvHbqsV/IMG_4548.jpg
https://i.postimg.cc/SsrmtNCd/IMG_4538.jpg
https://i.postimg.cc/dQ5q23qt/IMG-4549.jpg
-
- Major Constructor
- Posts: 1178
- Joined: Wed Apr 18, 2007 12:18 pm
- Your Name: PGarat
- Favorite F1 Team or Driver: Ferrari, McLaren, Lotus…
Chris Amon, P.Depailler, James Hunt, Jim Clark, Tazio Nuvolari, Ascari… - Location: SW of France
- Status: Offline
Re: I Checked in to Rehab - Ferrari 312B
Hi,
Nice job and great rehab for the 313B!
Well done.
Pascal
Nice job and great rehab for the 313B!
Well done.
Pascal
I'd rather be flying!
If only Closed Minds came with Closed Mouth
If only Closed Minds came with Closed Mouth
-
- Best of the Rest
- Posts: 534
- Joined: Sat Sep 05, 2009 5:34 am
- Your Name: Lee Hoe Yen
- Favorite F1 Team or Driver: Lotus
- Location: Tanzania
- Contact:
- Status: Offline
Re: I Checked in to Rehab - Ferrari 312B
Your 312B is looking good so far. I, too been restoring my old 1:12 F1 builds & finding them very challenging due to all the "bio degraded" parts.
-
Topic author - F2 Champion
- Posts: 177
- Joined: Sun Feb 15, 2015 8:55 am
- Favorite F1 Team or Driver: Shadow
- Location: West Bloomfield, Michigan
- Status: Offline
Re: I Checked in to Rehab - Ferrari 312B
Some modelers have asked me how I disassembled the original built kits successfully. None of the models have any super glue, so they all are either old Testors glue or the Tamiya cement that came in the kits back then. I can tell Tamiya cement was different and similiar in composition to what they have today because I recollect the smell. LOL.
I didn't use any form of chemical on the parts, just prying carefully with my hands first. If that did not work, I used an xacto to score where the parts were glued, and that seemed to help a lot. Then lightly wiggle the parts apart. Some parts didn't come apart so easliy mainly the rear bulkhead, that is because I used a lot of glue on it back in the first build! So it took some of the red bodywork with it, fortunately that was on the underside of the model and is not seen. If it were on the top, some scratch building with today's materials and tools would be relatively easy. As i mentioned the headers were REALLY on there and I did not remove them, so I again, scored around the cam covers with an xacto, and pried them loose. I then maneuvered them out of the block and cleared the exhaust. That was pretty easy.
Just take your time and it should work out. The tiny parts are not so easy, and you will have to be careful and plan to scratch build some of these parts.
Don't be afraid. Don't be shy. I had nothing to lose except perform a better model of something special or hard to find.
No on to progress…
The halfshafts were a bit of a mess at the u joints. I cleaned the glue off of these and drilled and pinned for easier assembly. As these parts will effectively be hidden, I plan to glue them in place and paint semi gloss black. The tires will NOT rotate when done.
https://i.postimg.cc/hjW5FfzT/IMG-4468.jpg
The engine and transmission were carefully installed into the chassis. I did not glue this in place, however I had to move and mess around with the fuel injection lines as the engine did not want to go all the way forward. Those are the hang up parts in regards to engine location. As it is, the assembly is maybe 2mm from going all the way in, but it appears that this will be acceptable to locate the suspension parts. I also installed the intake trumpets and the upper radius rod mounts, painted metallic gray.
https://i.postimg.cc/nVK6JY1z/IMG_4657.jpg
The front cover did not fit as it interfered with the front suspension. I filed off the bottom and somehow it fit again so it snaps in place.
https://i.postimg.cc/W1zK0RcF/IMG-4466.jpg
I had to move my painting operations out to the garage. My wife Is allergic to most anything and this is the result of health issues. I can warm up the garage with a wood burner far from the paint booth. The location of the booth is a temporary item for now, and uses a charcoal medium to filter out the paint fumes and particles. It blows right back into the garage, but I must say it is pretty impressive. I had it vented outside while in the basement, but lingering fumes in a confined area near the air pickup for the house furnace was moving the fumes through the house. Even I can tell the better air quality in our house, so maybe this is a win for everyone. I paint with about 45 degrees F, and place the parts near a radiant heater, so far so good….. Here is my $1.99 cheap arse thermometer-looks like I already ruined the thing with paint....LOL
https://i.postimg.cc/YCF6581D/IMG-4596-1.jpg
I didn't use any form of chemical on the parts, just prying carefully with my hands first. If that did not work, I used an xacto to score where the parts were glued, and that seemed to help a lot. Then lightly wiggle the parts apart. Some parts didn't come apart so easliy mainly the rear bulkhead, that is because I used a lot of glue on it back in the first build! So it took some of the red bodywork with it, fortunately that was on the underside of the model and is not seen. If it were on the top, some scratch building with today's materials and tools would be relatively easy. As i mentioned the headers were REALLY on there and I did not remove them, so I again, scored around the cam covers with an xacto, and pried them loose. I then maneuvered them out of the block and cleared the exhaust. That was pretty easy.
Just take your time and it should work out. The tiny parts are not so easy, and you will have to be careful and plan to scratch build some of these parts.
Don't be afraid. Don't be shy. I had nothing to lose except perform a better model of something special or hard to find.
No on to progress…
The halfshafts were a bit of a mess at the u joints. I cleaned the glue off of these and drilled and pinned for easier assembly. As these parts will effectively be hidden, I plan to glue them in place and paint semi gloss black. The tires will NOT rotate when done.
https://i.postimg.cc/hjW5FfzT/IMG-4468.jpg
The engine and transmission were carefully installed into the chassis. I did not glue this in place, however I had to move and mess around with the fuel injection lines as the engine did not want to go all the way forward. Those are the hang up parts in regards to engine location. As it is, the assembly is maybe 2mm from going all the way in, but it appears that this will be acceptable to locate the suspension parts. I also installed the intake trumpets and the upper radius rod mounts, painted metallic gray.
https://i.postimg.cc/nVK6JY1z/IMG_4657.jpg
The front cover did not fit as it interfered with the front suspension. I filed off the bottom and somehow it fit again so it snaps in place.
https://i.postimg.cc/W1zK0RcF/IMG-4466.jpg
I had to move my painting operations out to the garage. My wife Is allergic to most anything and this is the result of health issues. I can warm up the garage with a wood burner far from the paint booth. The location of the booth is a temporary item for now, and uses a charcoal medium to filter out the paint fumes and particles. It blows right back into the garage, but I must say it is pretty impressive. I had it vented outside while in the basement, but lingering fumes in a confined area near the air pickup for the house furnace was moving the fumes through the house. Even I can tell the better air quality in our house, so maybe this is a win for everyone. I paint with about 45 degrees F, and place the parts near a radiant heater, so far so good….. Here is my $1.99 cheap arse thermometer-looks like I already ruined the thing with paint....LOL
https://i.postimg.cc/YCF6581D/IMG-4596-1.jpg
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 256 Views
-
Last post by marlborored