Nothing spectacular this time...just some printed rivets for the roolhoop, still amazed how small you can print
A bit more printing, just to lazy for cleanup and sanding/drilling all the holes in whitemetal parts.
Sorry if pictures don't work, still have to update my server but I'm really bad/lazy at those computerthings...
Model Factory Hiro, Toleman TG 184, 1/12
-
- Major Constructor
- Posts: 1178
- Joined: Wed Apr 18, 2007 12:18 pm
- Your Name: PGarat
- Favorite F1 Team or Driver: Ferrari, McLaren, Lotus…
Chris Amon, P.Depailler, James Hunt, Jim Clark, Tazio Nuvolari, Ascari… - Location: SW of France
- Status: Offline
Re: Model Factory Hiro, Toleman TG 184, 1/12
Hi,
I love the monocoque and the exhaust!
Pascal
I love the monocoque and the exhaust!
Pascal
I'd rather be flying!
If only Closed Minds came with Closed Mouth
If only Closed Minds came with Closed Mouth
-
Topic author - FOTA Chairman
- Posts: 2605
- Joined: Wed Aug 07, 2002 4:49 am
- Favorite F1 Team or Driver: Schumacher
- Location: Cologne/Germany
- Contact:
- Status: Offline
Re: Model Factory Hiro, Toleman TG 184, 1/12
I could need some help from someone who has that kit in his stash. Under step8 there is some heatshield that goes under the exhaust but my kit missed all the metal stickers. Could someone take a photo or better a scan of it so I can form a new one. Also the decals under the coolers and turbo would be great.
-
Topic author - FOTA Chairman
- Posts: 2605
- Joined: Wed Aug 07, 2002 4:49 am
- Favorite F1 Team or Driver: Schumacher
- Location: Cologne/Germany
- Contact:
- Status: Offline
Re: Model Factory Hiro, Toleman TG 184, 1/12
Making new suspension parts.
And some more.
Working on the front suspension and cutting pieces for easier painting and sandblasting.
Parts attached.
Drive shafts are also scratchbuilt.
Building the rear suspension with some many new parts was extremely difficult just to learn..............
...I should have added the sideplates before building the whole suspension
But no problem on the real car the plates are two pieces and I will do the same, like here....:
One problem you should be aware of when building the kit is that there are some problem with the turbo inlet and cooler
Everything behind the red line needs to be cut off. And the green line shows the tube from the cooler needs to be cut and moved to the front...
Last edited by daniel on Thu Jan 05, 2023 1:14 pm, edited 2 times in total.
-
- Best of the Rest
- Posts: 546
- Joined: Tue May 06, 2008 10:07 pm
- Your Name: Jorge Alvear
- Favorite F1 Team or Driver: Kimi/Ferrari
- Location: Duluth Georgia USA
- Status: Offline
Re: Model Factory Hiro, Toleman TG 184, 1/12
Really super good work. Love the 3D printing bits.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 251 Views
-
Last post by ronnie1972