Some slight progress.
Just dry fitting, assembling.
It goes smoothly so far...
Triple FW07B in progress
-
Reutemann
Topic author - F2 Champion
- Posts: 125
- Joined: Tue Jan 03, 2006 8:57 am
- Your Name: Karel
- Favorite F1 Team or Driver: Ferrari
Alonso - Status: Offline
Re: Triple FW07B in progress
- Attachments
-
- FW07B-1
-
- FW07B-2
-
- FW07B-3
Re: Triple FW07B in progress
Really great.
Just two details: the upper sidepod edge green ends in a smoother way at the front, not with that small angle at 90 degrees.
Also check that KONI was not used there in later car, but at the aluminum chassis side.
Nice job. BTW it looks both decal makers had different criteria on some logo sizes.
As Knopfler said: "Two men say they're Jesus, ine of them must be wrong!"
Just two details: the upper sidepod edge green ends in a smoother way at the front, not with that small angle at 90 degrees.
Also check that KONI was not used there in later car, but at the aluminum chassis side.
Nice job. BTW it looks both decal makers had different criteria on some logo sizes.
As Knopfler said: "Two men say they're Jesus, ine of them must be wrong!"-
Reutemann
Topic author - F2 Champion
- Posts: 125
- Joined: Tue Jan 03, 2006 8:57 am
- Your Name: Karel
- Favorite F1 Team or Driver: Ferrari
Alonso - Status: Offline
Re: Triple FW07B in progress
@James, you are right, there is so many logos in 70/80 cars, I have just lost my attention with KONI... 
Well, the logos are under clearcoat , so no chance to repair...
Well, the logos are under clearcoat , so no chance to repair...
Re: Triple FW07B in progress
Then no worries: there are no unaccurate cars, but excess of checking references 
Nice group build!!!
Cars look soo neat.
Nice group build!!!
Cars look soo neat.