3d printing: Ford Escort MK1 in 1/12 scale
-
Topic author - FOTA Chairman
- Posts: 2247
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
Re: 3d printing: Ford Escort MK1 in 1/12 scale
Now i got the spec2 body printed and glued together.
https://abload.de/img/img_20220119_114833_chskfk.jpg
I got some issues with the roof in on the front.Even i made some extra strives in it it still got some deformations.
So i had to use some 2k putty for it.
https://abload.de/img/img_20220117_134131_ccgj21.jpg
After some sanding i made the first shot of primer.
Looking good so far.
https://abload.de/img/img_20220119_125043_csykb5.jpg
https://abload.de/img/img_20220119_125100_cxej15.jpg
https://abload.de/img/escort-dickereifenngjat.jpg
Just ckecked the tire size and put it onto the car.Looking massive!
regards Christian
https://abload.de/img/img_20220119_114833_chskfk.jpg
I got some issues with the roof in on the front.Even i made some extra strives in it it still got some deformations.
So i had to use some 2k putty for it.
https://abload.de/img/img_20220117_134131_ccgj21.jpg
After some sanding i made the first shot of primer.
Looking good so far.
https://abload.de/img/img_20220119_125043_csykb5.jpg
https://abload.de/img/img_20220119_125100_cxej15.jpg
https://abload.de/img/escort-dickereifenngjat.jpg
Just ckecked the tire size and put it onto the car.Looking massive!
regards Christian
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
-
- F2 Champion
- Posts: 109
- Joined: Wed Jul 24, 2019 9:20 am
- Favorite F1 Team or Driver: Ferrari, Lotus, Williams
- Location: Italy
- Status: Offline
Re: 3d printing: Ford Escort MK1 in 1/12 scale
Wow so aggressive! Nice progress!
Re: 3d printing: Ford Escort MK1 in 1/12 scale
Looks very good Christian, good job!
Wird`s auch ne Bud Spencer und Terence Hill Version geben?
Wird`s auch ne Bud Spencer und Terence Hill Version geben?
Take a stand!
-
Topic author - FOTA Chairman
- Posts: 2247
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
Re: 3d printing: Ford Escort MK1 in 1/12 scale
Thanks!
Stimmt,die beiden fuhren ja auch mit dem Escort durch mindestens einen Film!
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Re: 3d printing: Ford Escort MK1 in 1/12 scale
Danach dann bitte noch die RS Version von den Profis!
Da kannst du den Capri gleich nochmal mit machen.
Da kannst du den Capri gleich nochmal mit machen.
Take a stand!
-
Topic author - FOTA Chairman
- Posts: 2247
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
Re: 3d printing: Ford Escort MK1 in 1/12 scale
Hello,
tonight i will start the first test print of the engine - exhaust - carburetors and cooler.
Hope it turns out well tomorrow.
https://abload.de/img/escort-motor26kk5o.jpg
tonight i will start the first test print of the engine - exhaust - carburetors and cooler.
Hope it turns out well tomorrow.
https://abload.de/img/escort-motor26kk5o.jpg
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
-
- Formula e
- Posts: 38
- Joined: Wed Jan 21, 2009 1:37 pm
- Your Name: Stefan
- Favorite F1 Team or Driver: Jordan
- Location: USA,MA
- Status: Offline
Re: 3d printing: Ford Escort MK1 in 1/12 scale
I cross my fingers, Christian!
Bedt regards
Jochen
Bedt regards
Jochen
-
- Major Constructor
- Posts: 1087
- Joined: Wed Jan 02, 2002 9:04 pm
- Your Name: Pete Johnson
- Favorite F1 Team or Driver: Lotus Jim Clark
- Location: San Marcos, Ca
- Status: Offline
Re: 3d printing: Ford Escort MK1 in 1/12 scale
Very nice work! I have a somewhat rude question. What does it cost in printing material to do something on this large of a scale? I know doing a project like this is not about cost, but idol curiosity got the better of me.
Re: 3d printing: Ford Escort MK1 in 1/12 scale
Good Luck Christian! This will be a stunning model, good job!
Do you have the Weber carburators seperatly? I mean the files?
Do you have the Weber carburators seperatly? I mean the files?
Take a stand!
-
Topic author - FOTA Chairman
- Posts: 2247
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
Re: 3d printing: Ford Escort MK1 in 1/12 scale
@Pete: it's something in the range of 1-1,5 kg of resin needed. The supports needs a lot on the body parts. The smaller parts needs less supports.
Its something I never thought about it so far. I got my price when I offer it and that is OK for me and hopefully not too much for modeler who wants one.
@gp-models : yes I got the files from the Webers separatly and I also printed them separate. But those files can be found on the net. Search for 3d specialities. I merged them with other files I got to create a look I liked more.
Its something I never thought about it so far. I got my price when I offer it and that is OK for me and hopefully not too much for modeler who wants one.
@gp-models : yes I got the files from the Webers separatly and I also printed them separate. But those files can be found on the net. Search for 3d specialities. I merged them with other files I got to create a look I liked more.
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
-
- Similar Topics
- Replies
- Views
- Last post
-
- 11 Replies
- 601 Views
-
Last post by marlborored