3d Printing: Porsche 917/10 in 1/12 scale
-
Topic author - FOTA Chairman
- Posts: 2247
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
3d Printing: Porsche 917/10 in 1/12 scale
Hello,
now i finally got all parts ready.
It took me a while to find the best solution of printing the parts in the right direction with the best support settings.
And than i had to re-design some parts for a better fitment.
But now i got my curbside kit ready and i also made a 1/24 slotcar kit and soon there will be a 1/24 curbside kit of the Porsche.
Here are some pics and an overview of all the parts i made for it.
https://abload.de/img/k1024_img_20210627_119yjzi.jpg
https://abload.de/img/k1024_img_20210627_11hwkw0.jpg
https://abload.de/img/k1024_img_20210627_11rqk7q.jpg
https://abload.de/img/k1024_img_20210627_11xdjb1.jpg
https://abload.de/img/k1024_img_20210627_11n0kci.jpg
https://abload.de/img/k1024_img_20210627_11n0j9l.jpg
https://abload.de/img/k1024_img_20210627_11aij18.jpg
https://abload.de/img/k1024_img_20210627_113iki5.jpg
https://abload.de/img/k1024_img_20210627_115akt7.jpg
The body and the chassis are made of 2 pieces. There are two bolts on each part which can be used for glueing the parts together.
There are also some mounting pins for the body and the rear engine frame for a better fitment.
Michael made an superb decal sheet for it and he got some other liverys on his computer.
https://abload.de/img/k1024_img_20210627_1125kuz.jpg
Hope you like my work and i hope i can find sometime for building in the next weeks.
If someone is interested in an Porsche just sent me a message.
I need round about one week for printing all parts of this kit.
My special price for board members are 160€ plus shipping.
I got 1 decal sheet here that can be ordered with it.The sheet cost is 45€.
Thanks for watching.
regards Christian
now i finally got all parts ready.
It took me a while to find the best solution of printing the parts in the right direction with the best support settings.
And than i had to re-design some parts for a better fitment.
But now i got my curbside kit ready and i also made a 1/24 slotcar kit and soon there will be a 1/24 curbside kit of the Porsche.
Here are some pics and an overview of all the parts i made for it.
https://abload.de/img/k1024_img_20210627_119yjzi.jpg
https://abload.de/img/k1024_img_20210627_11hwkw0.jpg
https://abload.de/img/k1024_img_20210627_11rqk7q.jpg
https://abload.de/img/k1024_img_20210627_11xdjb1.jpg
https://abload.de/img/k1024_img_20210627_11n0kci.jpg
https://abload.de/img/k1024_img_20210627_11n0j9l.jpg
https://abload.de/img/k1024_img_20210627_11aij18.jpg
https://abload.de/img/k1024_img_20210627_113iki5.jpg
https://abload.de/img/k1024_img_20210627_115akt7.jpg
The body and the chassis are made of 2 pieces. There are two bolts on each part which can be used for glueing the parts together.
There are also some mounting pins for the body and the rear engine frame for a better fitment.
Michael made an superb decal sheet for it and he got some other liverys on his computer.
https://abload.de/img/k1024_img_20210627_1125kuz.jpg
Hope you like my work and i hope i can find sometime for building in the next weeks.
If someone is interested in an Porsche just sent me a message.
I need round about one week for printing all parts of this kit.
My special price for board members are 160€ plus shipping.
I got 1 decal sheet here that can be ordered with it.The sheet cost is 45€.
Thanks for watching.
regards Christian
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Re: 3d Printing: Porsche 917/10 in 1/12 scale
Christian, that is magnificent work! Can I include them in my 917 kit list, or do you want to stay 'under the radar' so to speak? If yes, under the Mezzo Mix Models name?
Rob
https://robdebie.home.xs4all.nl/models/917kits.htm
Rob
https://robdebie.home.xs4all.nl/models/917kits.htm
-
Topic author - FOTA Chairman
- Posts: 2247
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
Re: 3d Printing: Porsche 917/10 in 1/12 scale
Hey Rob,
of course you can add them to your list.There are also my RSR and the K3 in your list.
Thanks for that!
regards Christian
of course you can add them to your list.There are also my RSR and the K3 in your list.
Thanks for that!
regards Christian
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Re: 3d Printing: Porsche 917/10 in 1/12 scale
Thanks for the fast reply! The list has been updated.
It's exciting to add the first 3D resin printed models, I'm fiddling with 3D design and 3D printing too. But it also makes me a bit sad to see that you stopped casting parts. Sure it's messy, but I love the variety and possibilities that it created for us modelers. It's dear to me.
Rob
It's exciting to add the first 3D resin printed models, I'm fiddling with 3D design and 3D printing too. But it also makes me a bit sad to see that you stopped casting parts. Sure it's messy, but I love the variety and possibilities that it created for us modelers. It's dear to me.
Rob
-
- Constructors Champion
- Posts: 1355
- Joined: Mon Mar 30, 2020 1:56 pm
- Your Name: Thomas
- Favorite F1 Team or Driver: Williams, Ferrari, McLaren... Michael Schumacher
- Location: Crottendorf / Germany
- Status: Offline
Re: 3d Printing: Porsche 917/10 in 1/12 scale
Hi Christian, nice model and so much little details
Have you already assembled a car yourself?
Have you already assembled a car yourself?
Greetings Thomas
-
- FOTA Chairman
- Posts: 2518
- Joined: Thu Apr 22, 2004 1:45 pm
- Favorite F1 Team or Driver: McLaren, Senna; Lotus, Clark
- Location: Honolulu, Hawaii
- Status: Offline
Re: 3d Printing: Porsche 917/10 in 1/12 scale
Just amazed by this modern technology!
-
Topic author - FOTA Chairman
- Posts: 2247
- Joined: Fri Nov 27, 2009 10:36 am
- Your Name: Christian
- Favorite F1 Team or Driver: Carlos Sainz
- Location: Germany
- Contact:
- Status: Offline
Re: 3d Printing: Porsche 917/10 in 1/12 scale
Thanks guys.steinietrabi wrote: ↑Sun Jun 27, 2021 7:30 pm Hi Christian, nice model and so much little details
Have you already assembled a car yourself?
I am just in the middle of assembling one.
Looking good so far.
Resin Kits and Parts for Sale
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
Porsche 962 in 1/8 Scale IMSA & Shorttail New!
http://mezzo-mix-models.jimdo.com
-
- Constructors Champion
- Posts: 1355
- Joined: Mon Mar 30, 2020 1:56 pm
- Your Name: Thomas
- Favorite F1 Team or Driver: Williams, Ferrari, McLaren... Michael Schumacher
- Location: Crottendorf / Germany
- Status: Offline
Re: 3d Printing: Porsche 917/10 in 1/12 scale
I'm really looking forward to the pictures
It would definitely be a kit that I would buy, unfortunately not quite what I usually build, but it looks really interesting and is definitely a lot of fun.
It would definitely be a kit that I would buy, unfortunately not quite what I usually build, but it looks really interesting and is definitely a lot of fun.
Greetings Thomas
Re: 3d Printing: Porsche 917/10 in 1/12 scale
Those prints look fantastic Christian, realy impressing!
How much print time do you need for all parts?
How much print time do you need for all parts?
Take a stand!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 12 Replies
- 869 Views
-
Last post by SanMarino