I have adjusted the front suspension so that it can be plugged in very easily in order to have a little space for painting. The thinnest wishbone can now be easily plugged into the body using a small piece of brass wire.
http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3489.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3490.jpg
The rear part of the nose was glued to the chassis, since the gap is also present on the real vehicle, I only filled it with liquid resin and cured it. The surface is sanded and then the slot is neatly redrawn with an engraving blade.
http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3491.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3492.jpg
In between, a little test to see if everything fits and what it looks like after adding the parts.
http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3493.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3494.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3495.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3496.jpg
The nose also fits well, this will later be attached to the already fixed nose part with 2 brass pins.
http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3497.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3498.jpg
The headrest would have to be reworked a little to be able to insert it easily, here too I made a little more space for painting the parts. In addition, 2 brass pins were used to be able to insert the support in the front area in the chassis.
http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3499.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3501.jpg
Installation test of steering wheel, seat console and headrest after installing all parts.
http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3503.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3500.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3502.jpg
Test different halos to find the right shape. With the AMR21 there are a lot of small decals to be applied to the halo. It is therefore very important that the shape fits 100%.
http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3508.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3504.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3505.jpg
Test the rear wing on the floor plate and attach the very small T-wing.
http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3506.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3507.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3509.jpg
Overview of the current status ...
http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3510.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3511.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3512.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3513.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3514.jpg http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3515.jpg
The mirrors were glued on and sanded down.
http://steinietrabi-skoda-fabia.de/Modellbau/Aston%20Martin%20AMR21/IMG_3517.jpg
Oh, and I see it in the last picture I cut the glasses, these will be added back later in transparent.
That's enough for today... and I made some little decal work, but more next time!